best paint for boat topsides
The best available boat paint for the topside with the best finish is awlgrip, most expensive but best results and loved by customers. awlgrip marine paint also requires a little more “do it yourself savy” to apply these paints, and require the correct activators and reducers when applying. the manufacturer of awlgrip recommends it for. The topsides have been sanded and the hull is masked off ready for spraying. masking off when painting topsides, you should mask off the boat trailer, supports, bottom paint and toe-rail. professionals put a strip of masking tape along the boot top and along the deck edge. with this strip in place, the paper or plastic masking film can be applied.. A topside paint is any paint you apply above the waterline anywhere on your boat. this includes the sides of the hull, deck, and interiors. marine topside paints are commonly one of the following types: one-part polyurethane, two-part polyurethane, and alkyd marine enamel.. 
best paint for boat topsides Topside paint refers to the finish applied on a boat's upper hull and deck areas and always above the waterline. topside painting is done above the waterline to protect your boat from the sea, sun, and sand. prolonged sun exposure deteriorates wood and even fiberglass. there are essentially 3 kinds of topside coating: two part polyurethanes, one part polyurethanes, and enamel paints.. Zest is a light displacement design with a 2.2m (7ft 2in) draught, so painting the topsides involves working at height – with the boat in a cradle the bow is around 12ft off the ground. we used a couple of scaffold towers on castors, repositioning them as the job progressed..
