fibreglass boat primer
The best marine primer for bare fiberglass is a 2-part epoxy primer. this coating has been formulated as a hard, strong base for its associated epoxy and polyurethane paint system. hardworking epoxy primers are known for their outstanding adhesion and filling capabilities. epoxy primers are compatible with fiberglass, steel, and aluminum. Boat primer / fiberglass / epoxy / anti-corrosion hullgard extra . contact. boat primer. hullgard extra . hullgard extra is an epoxy holding primer, used to provide a stable base for subsequent fairing. offers superb adhesion to properly prepared fiberglass, steel, aluminum and wood. for use above and below. Step two: you will need to coat the surface of the boat with a primer before painting on fibreglass. it’s best to use a brush or roller to apply the primer as you will need a fine, even coat to cover the complete surface area you are planning to paint.. 
fibreglass boat primer You may need wax removing the solvent, clean cloth pads, epoxy putty, dual-action sander, sandpaper (60 and 80 grit), fiberglass primer, paint roller and covers, 2-part urethane paint for boats, foam brush, gloves, a chemical respirator mask, and safety glasses.. Here are our tips for painting a fiberglass boat. step two: apply the primer. getting paint to adhere to fiberglass for the long haul will require priming. once your area is safe, clean, and dry, apply the primer (sometimes called a “tie coat”) over the gel coat. you can use either a brush or a roller for this, but the goal is to have a.
