epoxy paint on fiberglass boat
Over time, air and salt water exposure causes the glossy finish on fiberglass boats to wear away. besides that, small collisions can cause dents in the fiberglass. your boat's aesthetic needs are also a preventive maintenance opportunity. luckily, it is not difficult to repaint a fiberglass boat with epoxy paint to restore her glossy finish.. Fiberglass boats come new with a colored gel coat, not actual paint. gel coats eventually fade and can not be cleaned or waxed to look new. painting the fiberglass is the only way to get the boat looking new again. preparing and painting fiberglass is unlike preparing and painting metal or aluminum. special steps. If you are using durabak boat paint, stick to roughing up the fiberglass surface with a 40-grit sandpaper instead. on the areas with epoxy, use a 36-grit and be a little more aggressive. painting the boat now you are ready for the exciting part! you can start by using a primer, although it is not necessary with a fiberglass boat.. 
epoxy paint on fiberglass boat Boat bottom paints that are a hard modified marine epoxy paint that does not wear off over time. typically these marine epoxy paints have higher concentrations of copper. these hard bottom boat paints last!. The best marine primer for bare fiberglass is a 2-part epoxy primer. this coating has been formulated as a hard, strong base for its associated epoxy and polyurethane paint system. hardworking epoxy primers are known for their outstanding adhesion and filling capabilities. epoxy primers are compatible with fiberglass, steel, and aluminum.
